TYVcure 3PX
TYVcure 3PX is a two-component system developed for the rehabilitation of industrial and communal wastewater facilities, water insulation of engineering structures. It results in a thick, high-strength, and chemical-resistant coating on technological structures. It's also suitable for use as a matrix material for glass fiber reinforced composites for various applications.
Composition
TYVcure 3PX resin is made of two liquid components:
- A component: waterglass solution
- B component: isocyanate-based blend
- A+B mixture: light, yellowish emulsion
Properties
- extremely fast-setting
- high strength
- high chemical resistance
- high abrasion resistance
Liquid Component Technical Data
| Name | Value | Unit |
|---|
| Enclosed space flash point of 'b' component | > 170 | °C |
| Open space flash point of 'b' component | > 200 | °C |
| Volatile organic content (voc) of 'a' component | 0 | m/m% |
| Volatile organic content (voc) of 'b' component | 0 | m/m% |
| Density of 'a' component | 1.5 ± 0.1 | g/cm3 |
| Viscosity of 'a' component | 400 ± 50 | mPas |
| Density of 'b' component | 1.2 ± 0.1 | g/cm3 |
| Viscosity of 'b' component | 190 ± 30 | mPas |
Hardened Resin Technical Data
| Name | Value | Unit |
|---|
| Compressive strength | ≥ 50 | MPa |
| Flexural strength | ≥ 30 | MPa |
| Adhesion strength | ≥ 3.2 | MPa |
| Linear shrinkage | ≤ 0.1 | % |
| Abrasion resistance | ≤ 75 | mg |
| Surface water uptake | ≤ 24 | g/m2•day |
Chemical Resistance
| Chemical | Result | Chemical | Result | Chemical | Result |
|---|
| Normal petrol | 1 | Super petrol | 5 | CaCl2- saturated | 5 |
| Diesel | 5 | Acetic acid 10% | 5 | Acetic acid 20% | 5 |
| Ethanol | 1 | Oil | 5 | Phosphoric acid 10% | 5 |
| H2O2 30% | 5 | H2O2 5% | 5 | H2SO4 10% | 5 |
| H2SO4 20% | 4 | H2SO4 40% | 5 | HCl 10% | 5 |
| HCl 37% | 5 | HNO3 10% | 5 | HNO3 20% | 4 |
| HNO3 40% | 1 | IPA | 4 | MgCl2- saturated | 5 |
| NaCl 20% | 5 | NaOH 10% | 5 | NaOH 30% | 5 |
| NaOH 50% | 5 | Lactic acid 10% | 5 | Toluol | 4 |
TYVcure 3PW
TYVcure 3PW is a two-component system developed for the rehabilitation of industrial and communal wastewater facilities, water insulation of engineering structures. It results in a thick, high-strength, and chemical resistant coating on technological structures. It is also suitable as a matrix material for glass fiber reinforced composites for various applications.
Composition
TYVcure 3PW resin is made of two liquid components:
- A component: waterglass solution
- B component: isocyanate-based blend
- A+B mixture: light, yellowish emulsion
Properties
- fast-setting for winter use
- high strength
- high chemical resistant
- high abrasion resistant
Liquid Component Technical Data
| Name | Value | Unit |
|---|
| Enclosed space flash point of 'b' component | > 170 | °C |
| Open space flash point of 'b' component | > 200 | °C |
| Volatile organic content (voc) of 'a' component | 0 | m/m% |
| Volatile organic content (voc) of 'b' component | 0 | m/m% |
| Density of 'a' component | 1.5 ± 0.1 | g/cm3 |
| Viscosity of 'a' component | 400 ± 50 | mPas |
| Density of 'b' component | 1.2 ± 0.1 | g/cm3 |
| Viscosity of 'b' component | 220 ± 30 | mPas |
Hardened Resin Technical Data
| Name | Value | Unit |
|---|
| Compressive strength | ≥ 50 | MPa |
| Flexural strength | ≥ 30 | MPa |
| Adhesion strength | ≥ 3.2 | MPa |
| Linear shrinkage | ≤ 0.1 | % |
| Abrasion resistance | ≤ 75 | mg |
| Surface water uptake | ≤ 24 | g/m2•day |
Chemical Resistance
| Chemical | Result | Chemical | Result | Chemical | Result |
|---|
| Normal petrol | 1 | Super petrol | 2 | CaCl2- saturated | 4 |
| Diesel | 4 | Acetic acid 10% | 4 | Acetic acid 20% | 3 |
| Ethanol | 1 | Oil | 4 | Phosphoric acid 10% | 5 |
| H2O2 30% | 3 | H2O2 5% | 4 | H2SO4 10% | 4 |
| H2SO4 20% | 3 | H2SO4 40% | 4 | HCl 10% | 5 |
| HCl 37% | 3 | HNO3 10% | 4 | HNO3 20% | 1 |
| HNO3 40% | 1 | IPA | 1 | MgCl2- saturated | 5 |
| NaCl 20% | 3 | NaOH 10% | 4 | NaOH 30% | 5 |
| NaOH 50% | 5 | Lactic acid 10% | 4 | Toluol | 2 |
TYVcure 3PS
TYVcure 3PS is a two-component system developed for the rehabilitation of industrial and communal wastewater facilities, water insulation of engineering structures. It produces a thick, high-strength, and chemical-resistant coating on technological structures, and is suitable as a matrix material for glass fiber reinforced composites for various applications.
Composition
TYVcure 3PS resin is made of two liquid components:
- A component: waterglass solution
- B component: isocyanate-based blend
- A+B mixture: light, yellowish emulsion
Properties
- fast-setting for summer use
- high strength
- high chemical resistance
- high abrasion resistance
Liquid Component Technical Data
| Name | Value | Unit |
|---|
| Enclosed space flash point of 'b' component | > 170 | °C |
| Open space flash point of 'b' component | > 200 | °C |
| Volatile organic content (voc) of 'a' component | 0 | m/m% |
| Volatile organic content (voc) of 'b' component | 0 | m/m% |
| Density of 'a' component | 1.5 ± 0.1 | g/cm3 |
| Viscosity of 'a' component | 400 ± 50 | mPas |
| Density of 'b' component | 1.2 ± 0.1 | g/cm3 |
| Viscosity of 'b' component | 210 ± 30 | mPas |
Hardened Resin Technical Data
| Name | Value | Unit |
|---|
| Compressive strength | ≥ 50 | MPa |
| Flexural strength | ≥ 30 | MPa |
| Adhesion strength | ≥ 3.2 | MPa |
| Linear shrinkage | ≤ 0.1 | % |
| Abrasion resistance | ≤ 75 | mg |
| Surface water uptake | ≤ 24 | g/m2•day |
Chemical Resistance
| Chemical | Result | Chemical | Result | Chemical | Result |
|---|
| Normal petrol | 1 | Super petrol | 5 | CaCl2- saturated | 5 |
| Diesel | 4 | Acetic acid 10% | 5 | Acetic acid 20% | 4 |
| Ethanol | 1 | Oil | 5 | Phosphoric acid 10% | 5 |
| H2O2 30% | 4 | H2O2 5% | 5 | H2SO4 10% | 5 |
| H2SO4 20% | 3 | H2SO4 40% | 5 | HCl 10% | 5 |
| HCl 37% | 5 | HNO3 10% | 5 | HNO3 20% | 2 |
| HNO3 40% | 1 | IPA | 2 | MgCl2- saturated | 5 |
| NaCl 20% | 5 | NaOH 10% | 5 | NaOH 30% | 5 |
| NaOH 50% | 5 | Lactic acid 10% | 5 | Toluol | 2 |
TYVcure 3PLV60
TYVcure 3PLV60 is a two-component system developed for the rehabilitation of industrial and communal wastewater facilities, water insulation of engineering structures. It provides a thick, high-strength, and chemical resistant coating on technological structures and is suitable as a matrix material for glass fiber reinforced composites for various application purposes.
Composition
TYVcure 3PLV60 resin is made of two liquid components:
- A component: waterglass solution
- B component: isocyanate-based blend
- A+B mixture: light, yellowish emulsion
Properties
- slow-setting
- high strength
- low initial viscosity
- high chemical resistance
- high abrasion resistance
Liquid Component Technical Data
| Name | Value | Unit |
|---|
| Enclosed space flash point of 'b' component | > 170 | °C |
| Open space flash point of 'b' component | > 200 | °C |
| Volatile organic content (voc) of 'a' component | 0 | m/m% |
| Volatile organic content (voc) of 'b' component | 0 | m/m% |
| Density of 'a' component | 1.5 ± 0.1 | g/cm3 |
| Viscosity of 'a' component | 400 ± 50 | mPas |
| Density of 'b' component | 1.2 ± 0.1 | g/cm3 |
| Viscosity of 'b' component | 100 ± 20 | mPas |
Hardened Resin Technical Data
| Name | Value | Unit |
|---|
| Compressive strength | ≥ 40 | MPa |
| Flexural strength | ≥ 20 | MPa |
| Adhesion strength | ≥ 3.2 | MPa |
| Linear shrinkage | ≤ 0.1 | % |
| Abrasion resistance | ≤ 75 | mg |
| Surface water uptake | ≤ 24 | g/m2•day |
TYVcure 3PHV60
TYVcure 3PHV60 is a two-component system developed for the rehabilitation of industrial and communal wastewater facilities, water insulation of engineering structures. It provides a thick, high-strength, and chemical resistant coating on technological structures and is suitable as a matrix material for glass fiber reinforced composites for various applications.
Composition
TYVcure 3PHV60 resin is made of two liquid components:
- A component: waterglass solution
- B component: isocyanate-based blend
- A+B mixture: light, yellowish emulsion
Properties
- slow-setting
- high strength
- high initial viscosity
- high chemical resistance
- high abrasion resistance
Liquid Component Technical Data
| Name | Value | Unit |
|---|
| Enclosed space flash point of 'b' component | > 170 | °C |
| Open space flash point of 'b' component | > 200 | °C |
| Volatile organic content (voc) of 'a' component | 0 | m/m% |
| Volatile organic content (voc) of 'b' component | 0 | m/m% |
| Density of 'a' component | 1.5 ± 0.1 | g/cm3 |
| Viscosity of 'a' component | 400 ± 50 | mPas |
| Density of 'b' component | 1.2 ± 0.1 | g/cm3 |
| Viscosity of 'b' component | 520 ± 50 | mPas |
Hardened Resin Technical Data
| Name | Value | Unit |
|---|
| Compressive strength | ≥ 50 | MPa |
| Flexural strength | ≥ 30 | MPa |
| Adhesion strength | ≥ 3.2 | MPa |
| Linear shrinkage | ≤ 0.1 | % |
| Abrasion resistance | ≤ 75 | mg |
| Surface water uptake | ≤ 24 | g/m2•day |
TYVcure 3PL85
TYVcure 3PL85 is a two-component system developed for the rehabilitation of industrial and communal wastewater facilities, water insulation of engineering structures. It produces a thick, high-strength, and chemical-resistant coating on technological structures and is also suitable as a matrix material for glass fiber reinforced composites for various applications.
Composition
TYVcure 3PL85 resin is made of two liquid components:
- A component: waterglass solution
- B component: isocyanate-based blend
- A+B mixture: light, yellowish emulsion
Properties
- slow-setting
- high strength
- high chemical resistance
- high abrasion resistance
Liquid Component Technical Data
| Name | Value | Unit |
|---|
| Enclosed space flash point of 'b' component | > 170 | °C |
| Open space flash point of 'b' component | > 200 | °C |
| Volatile organic content (voc) of 'a' component | 0 | m/m% |
| Volatile organic content (voc) of 'b' component | 0 | m/m% |
| Density of 'a' component | 1.5 ± 0.1 | g/cm3 |
| Viscosity of 'a' component | 400 ± 50 | mPas |
| Density of 'b' component | 1.2 ± 0.1 | g/cm3 |
| Viscosity of 'b' component | 180 ± 30 | mPas |
Hardened Resin Technical Data
| Name | Value | Unit |
|---|
| Compressive strength | ≥ 50 | MPa |
| Flexural strength | ≥ 30 | MPa |
| Adhesion strength | ≥ 3.2 | MPa |
| Linear shrinkage | ≤ 0.1 | % |
| Abrasion resistance | ≤ 75 | mg |
| Surface water uptake | ≤ 24 | g/m2•day |
Chemical Resistance
| Chemical | Result | Chemical | Result | Chemical | Result |
|---|
| Normal petrol | 1 | Super petrol | 1 | CaCl2- saturated | 4 |
| Diesel | 3 | Acetic acid 10% | 5 | Acetic acid 20% | 5 |
| Ethanol | 1 | Oil | 5 | Phosphoric acid 10% | 5 |
| H2O2 30% | 5 | H2O2 5% | 5 | H2SO4 10% | 2 |
| H2SO4 20% | 4 | H2SO4 40% | 2 | HCl 10% | 5 |
| HCl 37% | 5 | HNO3 10% | 1 | HNO3 20% | 5 |
| HNO3 40% | 1 | IPA | 3 | MgCl2- saturated | 5 |
| NaCl 20% | 5 | NaOH 10% | 5 | NaOH 30% | 5 |
| NaOH 50% | 5 | Lactic acid 10% | 5 | Toluol | 1 |
TYVcure 3PL150
TYVcure 3PL150 is a two-component system developed for the rehabilitation of industrial and communal wastewater facilities, water insulation of engineering structures. It produces a thick, high-strength, and chemical-resistant coating on technological structures and is suitable as a matrix material for glass fiber reinforced composites for various applications.
Composition
TYVcure 3PL150 resin is made of two liquid components:
- A component: waterglass solution
- B component: isocyanate-based blend
- A+B mixture: light, yellowish emulsion
Properties
- ultra slow-setting
- high strength
- high chemical resistance
- high abrasion resistance
Liquid Component Technical Data
| Name | Value | Unit |
|---|
| Enclosed space flash point of 'b' component | > 170 | °C |
| Open space flash point of 'b' component | > 200 | °C |
| Volatile organic content (voc) of 'a' component | 0 | m/m% |
| Volatile organic content (voc) of 'b' component | 0 | m/m% |
| Density of 'a' component | 1.5 ± 0.1 | g/cm3 |
| Viscosity of 'a' component | 400 ± 50 | mPas |
| Density of 'b' component | 1.2 ± 0.02 | g/cm3 |
| Viscosity of 'b' component | 200 ± 50 | mPas |
Hardened Resin Technical Data
| Name | Value | Unit |
|---|
| Compressive strength | ≥ 40 | MPa |
| Flexural strength | ≥ 20 | MPa |
| Adhesion strength | ≥ 3.2 | MPa |
| Linear shrinkage | ≤ 0.1 | % |
| Abrasion resistance | ≤ 75 | mg |
| Surface water uptake | ≤ 24 | g/m2•day |
